What stands out about this cylinder is its unbranded body, which can look quite sleek.
Please make sure your model matches the description, remove and measure your cylinder to compare with each item specification. 1. Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Please note some cylinder rod head OD size is not rod size. 2. Wear rings. Piston wear ring: 101.6 mm ( OD 4") x 95.25mm (ID 3.75") x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2") x 9.53mm (0.375" wide), Nylon 3. Piston seals 1 square ring and 1 O-ring. Piston Square ring: D101.6 mm x 91.6mm x 3.28mm; O-ring (installed under the square ring): 91.0 mm x 2.65 mm . CPU + NBR 4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. 5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU Below is 4.0" Bore x 1.75" rod cylinder Specification that OEM made by this seal kit: Retracted (center to center between rod mountain hole and clevis hole: 32.4" Extended (center to center same as above): 56.4" Stroke: 24±0.05" Dimension from center of clevis hole to back face of cylinder: 2.95" Dimension from center of rod end hole to front face of rod: 1.06" Dimension from center of rod end hole to front face of cylinder: 1.18" Ports: 1/2" NPT Dimension from port to port: 25.4" Rod: 1.75" rod Rod end mountain hole: 0.55" Clevis Mountain hole: 1.16" Dimension between mountain clevis to clevis: 0.87" Thickness of each mountain clevis: 0.375" Length of each mounting clevis: 4.125"
4.5" Bore x 1.75" Rod Cylinder Hydraulic Log Splitter Cylinder Rebuild Seal Kit【Specific Application】This Cylinder Rebuild Seal Kit is compatible with Bore (Inner Diameter) 4.5” x Rod (Outer Diameter) 1.75” Cylinder. Please note some cylinder rod head OD size is not the rod size. 【Perfect Replacement】This kit includes all the seals and o-rings needed for a complete cylinder rebuild, ensuring long-lasting durability and reliability. Made with high-quality materials, this kit is designed to meet or exceed OEM fit and performance specifications. 【Strong Function】This Cylinder Rebuild Seal Kit provides an easy and effective way to rebuild the cylinder on the log splitter, preventing oil leaks and other cylinder damage to extend the life of your log splitter cylinder. 【Superior Material】Made of high-quality rubber, plastic and steel. These seals are malleable, long-lasting, and crack-resistant. Better quality allows the items to be used for a longer time. 【100% Satisfaction Guarantee】We are committed to providing excellent products and the best service for our customers. If you are not satisfied with the product, you can simply return it. We support a 60-day full refund on return and a 12-month warranty.Please Read Below Carefully to Check that the Kit Fits Your Cylinder Before UseThe seal kit is used to rebuilt Speeco design or compatible other brand cylinders, such as Husky, Split Master, Oregon, Dirty Hands tool and after marker cylinders oversea made with same Speeco design (but may not fit 20 years or older design). Note that it may not fit all older Speeco cylinders made with older designs.So to know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.For Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75"PaymentShippingReturn & WarrantyLeave feedbackContact usPayment1.We accept PayPal payment and many other payments. Items will be shipped within 1 business day of receiving full payment. Shipping1.All items will be shipped out in 1 business day,no expedited service available.2.Our items will be delivered within 4-6 business days. 3.We have multiple warehouses in US, and will choose the nearest one for shipping, according to your address and our inventory Return & Warranty1. 60 Days Free Returns, please notify us within 60 days after you've received your purchased item. 2. All return requests must be submitted through your eBay account. 3. Return shipping shall be the responsibility of the buyer. We pay the shipping when it is our fault. 4. Items to be returned must be in resalable condition. 5. All returns are for refund ONLY. No exchange accepted. Leave feedback1.If you are not satisfied for any reasons, please do not be so quick to leave negative/neutral feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problems for you and always leave positive feedback to all our customers. 2.If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 scores DSR. Thanks!Contact us1.Any Questions,Just feel free to contact us on eBay.We will reply you in 1-2 business day.BrandJF-AutoManufacturer Part NumberDoes not applyWarranty1 YearTypeHydraulic Log Splitter Cylinder Rebuild Seal KitFitmentfor 4.5" Bore x 1.75" Rod CylinderPart Typecylinder rebuild seal kitMaterialhigh-quality rubber, plastic and steelSeal Size4.5"Bore x 1.75"FeaturesDurable & Easy installationMPNDoes not apply
1. Payment methods accepted: Our payment account allows you to pay by Payonner, credit card, debit card and your Paypal balance. 2. All major credit cards are accepted through our secure payment processor Paypal. 3. We ship items to Your ebay address.Please make sure it is correct before you pay,cause it cannot be changed once your order shipped out. 1. Item will be shipped within 1 business day after your payment cleared. 2. Item will be shipped by USPS/UPS. 3. Delivery time depends on destination and other factors,please feel free to contact us by email if you cannot get your order in time. Please read the shipment and payment detail carefully before you pay. 1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyers choice) 2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.And all NON-seller mistake returns for refund are subject to 20% re-stocking fee. 3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please include your ebay item number or order number in all communications.We will respond within 1 business day or less.We apologize for the late reply during the holidays.Thank you for your understanding. Our office hours is as below : - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday And our office is closed on Sunday and public holidays (Hong Kong) All rights reserved.
Hydraulic Log splitter cylinder rebuild seal kit for 4.0"Bore x 1.75" rod cylinder Please pay attention, 4.0" Bore size is cylinder tube I.D size.it is not the Tube O.D. Each manufacturer might have little different O.D. for 4.0" Bore cylinder,but I.D. will be 4.0". Please read below carefully. This kit might not fit your cylinder. The seal kit is used to rebuilt Speeco design or compatible other brand cylinders such as Husky, Split Master, Oregon, Dirty Hands tool and after marker cylinders oversea made with same Speeco design (but might be not good for your 20 years or older design). Please know it might not fit all old Speeco cylinders made with old design. Speeco Cylinder design is also most popular design in USA after market. We don't know your cylinder, so not guarantee it good for so many aftermarket cylinders. So to know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in. 1. Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Please note: 4.0" bore size is not Cylinder tube O.D. Cylinder rod size is inside tube part size. Some factory makes rod having different O.D between inside tube part and outside tube part. 2. Wear rings. Piston wear ring (drawing item 16): 101.6 mm (OD 4.0") x 95.25mm x 9.5mm (0.375" wide), NylonRod wear ring (drawing item 15): 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon3. Piston seals (drawing item 14)1 square ring and 1 O-ring. Piston Square ring: 101.6 mm x91.6mm x 3.28mm; O-ring (installed under the square ring): 103mm x 2.65mm. CPU + NBR4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. It is a compound seal ring to guarantee better seal and longer life. It is one of most important seals to prevent oil leakage.5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU 6. Rod and piston assembly O-ring (item 19): 26.5mm x 2.65mm, NBR. in mots case, this seal might not be needed to replace. This seal might be different size on some aftermarket model. We add one common size 25mm X 3.55mm as extra. It is standard O-ring. If our 2 O rings are not the size with your cylinder, you can easily find it at any local store, such as Home Depot.7. Gland O-ring (item 17): 92.5mm x 5.3mm, NBR and Gland Back up ring (Item 18): 101.6mm x 93mm x 1.5mm, PIFE. Please note: the backup ring is support O ring to against pressure, so it will be installed at outside of O-ring. See drawing for position. It is one of most important seals to prevent oil leakage.8. Steel wire spring (item 8): it is option item for your cylinder rebuild. You might not need it to replace your old one if it is not damaged during disassembly. Please be sure if our wire ring OD is not same with your old one, please don’t use it. If above part specification fits your cylinder, I have no reason to think our seal kit does not work for your cylinder. But still have about 5% buyers bought and return because not fit based on our sale record. Please measure your cylinder carefully before you place order. Some buyers machine their cylinder wear ring or seal O ring groove to make the seal sitting it. It is a good idea, but we don’t guarantee its performance.Assembly the seal carefully. if installation not correct and damaged seal, it will cause leakage at once or after a few months. If you don’t know assembly cylinder and no correct tools, please ask your local hydraulic shop for help. Below is 4.0" bore x 1.75" rod cylinder Specification that OEM made by this seal kit: Retracted (center to center between rod mountain hole and clevis hole): 32.4” Extended (center to center same as above): 56.4” Stroke: 24±0.05”Dimension from center of clevis hole to back face of cylinder: 2.95”Dimension from center of rod end hole to front face of rod: 1.06”Dimension from center of rod end hole to front face of cylinder: 1.18”Ports: ½” NPTDimension from port to port: 25.4”Rod: 1.75" rodRod end mountain hole: 0.55”Clevis Mountain hole: 1.16”Dimension between mountain clevis to clevis: 0.87”Thickness of each mountain clevis: 0.375”Length of each mounting clevis: 4.125”Ports are positioned 45 degrees from maintaining clevis positioned verticalMax operation pressure: 3500PSI Rebuildable
Please make sure your model matches the description, remove and measure your cylinder to compare with each item specification. 1. Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Please note some cylinder rod head OD size is not rod size. 2. Wear rings. Piston wear ring: 101.6 mm ( OD 4") x 95.25mm (ID 3.75") x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2") x 9.53mm (0.375" wide), Nylon 3. Piston seals 1 square ring and 1 O-ring. Piston Square ring: D101.6 mm x 91.6mm x 3.28mm; O-ring (installed under the square ring): 91.0 mm x 2.65 mm . CPU + NBR 4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. 5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU Below is 4.0" Bore x 1.75" rod cylinder Specification that OEM made by this seal kit: Retracted (center to center between rod mountain hole and clevis hole: 32.4" Extended (center to center same as above): 56.4" Stroke: 24±0.05" Dimension from center of clevis hole to back face of cylinder: 2.95" Dimension from center of rod end hole to front face of rod: 1.06" Dimension from center of rod end hole to front face of cylinder: 1.18" Ports: 1/2" NPT Dimension from port to port: 25.4" Rod: 1.75" rod Rod end mountain hole: 0.55" Clevis Mountain hole: 1.16" Dimension between mountain clevis to clevis: 0.87" Thickness of each mountain clevis: 0.375" Length of each mounting clevis: 4.125"
You will find that the unbranded design blends in well with existing equipment.
1. Payment methods accepted: Our payment account allows you to pay by Payonner, credit card, debit card and your Paypal balance. 2. All major credit cards are accepted through our secure payment processor Paypal. 3. We ship items to Your ebay address.Please make sure it is correct before you pay,cause it cannot be changed once your order shipped out. 1. Item will be shipped within 1 business day after your payment cleared. 2. Item will be shipped by USPS/UPS. 3. Delivery time depends on destination and other factors,please feel free to contact us by email if you cannot get your order in time. Please read the shipment and payment detail carefully before you pay. 1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyers choice) 2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.And all NON-seller mistake returns for refund are subject to 20% re-stocking fee. 3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please include your ebay item number or order number in all communications.We will respond within 1 business day or less.We apologize for the late reply during the holidays.Thank you for your understanding. Our office hours is as below : - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday And our office is closed on Sunday and public holidays (Hong Kong) All rights reserved.
1. Payment methods accepted: Payoneer. Our Payoneer account allows you to pay by credit card, debit card and your paypal balance. 2. All major credit cards are accepted through our secure payment processor Payoneer. 3. We ship items to Your Ebay address.Please make sure your Ebay address is correct before you pay, cause it cannot be changed once the order shipped out. 1. Item will be shipped out within 1-2 business days after clear payment received. 2. Please make sure shipping address on your Ebay account is correct & up-to-date. 3. All of our items are shipped from our US warehouse. 4. Please feel free to contact us via ebay using "Contact member" if you cannot get your order in time. 1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyers choice). 2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to 20% re-stocking fee. 3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. We will respond within 1 business day or less.Thank you for your understanding. And our office is closed on Sunday and public holidays (Hong Kong) We apologize for the late reply during the holidays.
Please include your ebay item number or order number in all communications. All rights reserved.
Hydraulic Log splitter cylinder rebuild seal kit for 4.5"Bore x 1.75" rod cylinderTo know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.1. Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75". Please note: 4.5" bore size is not Cylinder tube O.D. Cylinder rod size is inside tube part size.2. Wear rings.Piston wear ring : 114.3 mm (OD 4.5") x 107.95mm (ID 4.25”) x 9.53mm (0.375" wide), NylonRod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon3. Piston seals1 square ring and 1 O-ring. Piston Square ring: 114.3 mm x104.3mm x 3.28mm; O-ring (installed under the square ring): 103mm x 2.65mm. CPU + NBR4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. 5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPUBelow is 4.5"Bore x 1.75" rod cylinder Specification that OEM made by this seal kit:Retracted (center to center between rod mountain hole and clevis hole: 32.4"Extended (center to center same as above): 56.4"Stroke: 24±0.05"Dimension from center of clevis hole to back face of cylinder: 2.95"Dimension from center of rod end hole to front face of rod: 1.06"Dimension from center of rod end hole to front face of cylinder: 1.18"Ports: 1/2" NPTDimension from port to port: 25.4"Rod: 1.75" rodRod end mountain hole: 0.55"Clevis Mountain hole: 1.16"Dimension between mountain clevis to clevis: 0.87"Thickness of each mountain clevis: 0.375"Length of each mounting clevis: 4.125"