Item specifics:Part Type: cylinder rebuild seal kitSeal Size: 5.0"Bore x 2.0" Material: Rubber Plastic Please read below carefully: This kit might not fit your cylinder. The seal kit is used to rebuilt Speeco design or compatible other brand cylinders such as Husky, Split Master, Oregon, Dirty Hands tool and after marker cylinders oversea made with same Speeco design (but might be not good for your 20 years or older design)To know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.1. Cylinder tube Bore (I.D.) 5" x rod (O.D) 2". Please note some cylinder rod head OD size is not rod size.2. Wear rings.Piston wear ring : 127 mm (OD 5") x 120.65mm (ID 4.75”) x 9.5mm (0.375" wide), NylonRod wear ring : 50.8mm (ID 2") x 57.15mm (OD 2.25”) x 9.5mm (0.375" wide) Nylon3. Piston seals1 square ring and 1 O-ring. Piston Square ring: D127 mm x117mm x 3.28mm; O-ring (installed under the square ring): 115 mm x 2.65 mm . CPU + NBR4. Rod O-ring : 50.8mm x 63.5mm x 5mm, CPU. There is O-ring inside.5. Rod dust ring : 50.8mm x 60.3mm 5.5mm /7.3mm, TPUBelow is 5" bore x 2" rod cylinder Specification that OEM made by this seal kit:Retracted (center to center between rod mountain hole and clevis hole: 32.4”Extended (center to center same as above): 56.4”Stroke: 24±0.05”Dimension from center of clevis hole to back face of cylinder: 2.95”Dimension from center of rod end hole to front face of rod: 1.06”Dimension from center of rod end hole to front face of cylinder: 1.18”Ports: 1/2” NPTDimension from port to port: 25.4”Rod: 2.0" rodRod end mountain hole: 0.55”Clevis Mountain hole: 1.16”Dimension between mountain clevis to clevis: 0.87”
Hydraulic Log splitter cylinder rebuild seal kit for 4.5"Bore x 1.75" rod cylinderTo know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.1. Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75". Please note: 4.5" bore size is not Cylinder tube O.D. Cylinder rod size is inside tube part size.2. Wear rings.Piston wear ring : 114.3 mm (OD 4.5") x 107.95mm (ID 4.25”) x 9.53mm (0.375" wide), NylonRod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon3. Piston seals1 square ring and 1 O-ring. Piston Square ring: 114.3 mm x104.3mm x 3.28mm; O-ring (installed under the square ring): 103mm x 2.65mm. CPU + NBR4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. 5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPUBelow is 4.5"Bore x 1.75" rod cylinder Specification that OEM made by this seal kit:Retracted (center to center between rod mountain hole and clevis hole: 32.4"Extended (center to center same as above): 56.4"Stroke: 24±0.05"Dimension from center of clevis hole to back face of cylinder: 2.95"Dimension from center of rod end hole to front face of rod: 1.06"Dimension from center of rod end hole to front face of cylinder: 1.18"Ports: 1/2" NPTDimension from port to port: 25.4"Rod: 1.75" rodRod end mountain hole: 0.55"Clevis Mountain hole: 1.16"Dimension between mountain clevis to clevis: 0.87"Thickness of each mountain clevis: 0.375"Length of each mounting clevis: 4.125"
Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Rod: 1.75" rod. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. Wear rings. Piston wear ring : 101.6 mm ( OD 4") x 95.25mm (ID 3.75") x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon.
Hydraulic Log splitter cylinder rebuild seal kit for 4.5"Bore x 1.75" rod cylinderTo know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.1. Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75". Please note: 4.5" bore size is not Cylinder tube O.D. Cylinder rod size is inside tube part size. 2. Wear rings.Piston wear ring : 114.3 mm (OD 4.5") x 107.95mm (ID 4.25”) x 9.53mm (0.375" wide), NylonRod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon 3. Piston seals1 square ring and 1 O-ring. Piston Square ring: 114.3 mm x104.3mm x 3.28mm; O-ring (installed under the square ring): 103mm x 2.65mm. CPU + NBR 4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. 5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm,TPUBelow is 4.5"Bore x 1.75" rod cylinder Specification that OEM made by this seal kit:Retracted (center to center between rod mountain hole and clevis hole: 32.4”Extended (center to center same as above): 56.4”Stroke: 24±0.05”Dimension from center of clevis hole to back face of cylinder: 2.95”Dimension from center of rod end hole to front face of rod: 1.06”Dimension from center of rod end hole to front face of cylinder: 1.18”Ports: 1/2" NPTDimension from port to port: 25.4”Rod: 1.75" rodRod end mountain hole: 0.55”Clevis Mountain hole: 1.16”Dimension between mountain clevis to clevis: 0.87”Thickness of each mountain clevis: 0.375”Length of each mounting clevis: 4.125”
Please read below carefully. This kit might not fit your cylinder. The seal kit is used to rebuilt Speeco design or compatible other brand cylinders such as Husky, Split Master, Oregon, Dirty Hands tool and after marker cylinders oversea made with same Speeco design (but might be not good for your 20 years or older design) To know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in. 1. Cylinder tube Bore (I.D.) 5" x rod (O.D) 2". Please note some cylinder rod head OD size is not rod size. 2. Wear rings. Piston wear ring : 127 mm (OD 5") x 120.65mm (ID 4.75") x 9.5mm (0.375" wide), Nylon Rod wear ring : 50.8mm (ID 2") x 57.15mm (OD 2.25") x 9.5mm (0.375" wide) Nylon 3. Piston seals 1 square ring and 1 O-ring. Piston Square ring: D127 mm x117mm x 3.28mm; O-ring (installed under the square ring): 115 mm x 2.65 mm . CPU + NBR 4. Rod O-ring : 50.8mm x 63.5mm x 5mm, CPU. There is O-ring inside. 5. Rod dust ring : 50.8mm x 60.3mm 5.5mm /7.3mm, TPU Below is 5" bore x 2" rod cylinder Specification that OEM made by this seal kit: Retracted (center to center between rod mountain hole and clevis hole: 32.4" Extended (center to center same as above): 56.4" Stroke: 24±0.05" Dimension from center of clevis hole to back face of cylinder: 2.95" Dimension from center of rod end hole to front face of rod: 1.06" Dimension from center of rod end hole to front face of cylinder: 1.18" Ports: 1/2" NPT Dimension from port to port: 25.4" Rod: 2.0" rod Rod end mountain hole: 0.55" Clevis Mountain hole: 1.16" Dimension between mountain clevis to clevis: 0.87"
Item specifics:Part Type: cylinder rebuild seal kitSeal Size: 5.0"Bore x 2.0" Material: Rubber Plastic Please read below carefully: This kit might not fit your cylinder. The seal kit is used to rebuilt Speeco design or compatible other brand cylinders such as Husky, Split Master, Oregon, Dirty Hands tool and after marker cylinders oversea made with same Speeco design (but might be not good for your 20 years or older design)To know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.1. Cylinder tube Bore (I.D.) 5" x rod (O.D) 2". Please note some cylinder rod head OD size is not rod size.2. Wear rings.Piston wear ring : 127 mm (OD 5") x 120.65mm (ID 4.75”) x 9.5mm (0.375" wide), NylonRod wear ring : 50.8mm (ID 2") x 57.15mm (OD 2.25”) x 9.5mm (0.375" wide) Nylon3. Piston seals1 square ring and 1 O-ring. Piston Square ring: D127 mm x117mm x 3.28mm; O-ring (installed under the square ring): 115 mm x 2.65 mm . CPU + NBR4. Rod O-ring : 50.8mm x 63.5mm x 5mm, CPU. There is O-ring inside.5. Rod dust ring : 50.8mm x 60.3mm 5.5mm /7.3mm, TPUBelow is 5" bore x 2" rod cylinder Specification that OEM made by this seal kit:Retracted (center to center between rod mountain hole and clevis hole: 32.4”Extended (center to center same as above): 56.4”Stroke: 24±0.05”Dimension from center of clevis hole to back face of cylinder: 2.95”Dimension from center of rod end hole to front face of rod: 1.06”Dimension from center of rod end hole to front face of cylinder: 1.18”Ports: 1/2” NPTDimension from port to port: 25.4”Rod: 2.0" rodRod end mountain hole: 0.55”Clevis Mountain hole: 1.16”Dimension between mountain clevis to clevis: 0.87”
Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75". Below is 4.5"Bore x 1.75" rod cylinder Specification that OEM made by this seal kit Double check each seal groove is good for our part sitting in.
Please make sure your model matches the description,remove and measure your cylinder to compare with each item specification.1. Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Please note some cylinder rod head OD size is not rod size.2. Wear rings. Piston wear ring : 101.6 mm ( OD 4") x 95.25mm (ID 3.75") x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon3. Piston seals 1 square ring and 1 O-ring. Piston Square ring: D101.6 mm x91.6mm x 3.28mm; O-ring (installed under the square ring): 91.0 mm x 2.65 mm . CPU + NBR4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside.5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPUBelow is 4.0"Bore x 1.75" rod cylinder Specification that OEM made by this seal kit: Retracted (center to center between rod mountain hole and clevis hole: 32.4” Extended (center to center same as above): 56.4”Stroke: 24±0.05”Dimension from center of clevis hole to back face of cylinder: 2.95” Dimension from center of rod end hole to front face of rod: 1.06” Dimension from center of rod end hole to front face of cylinder: 1.18” Ports: 1/2" NPT Dimension from portto port: 25.4”Rod: 1.75" rodRod end mountain hole: 0.55”Clevis Mountain hole: 1.16”Dimension between mountain clevis to clevis: 0.87”Thickness of each mountain clevis: 0.375”Length of each mounting clevis: 4.125”On Oct 9, 2023 at 14:23:43 PDT, seller added the following information: