Quantity: 1pcsWe are professional Tablet, Mobile phone, Computer, Industrial parts supplier, welcome contact us for favorable wholesale price! SPECIFICATION* Installation instructions not included.There is a layer of polarizer film on the front of the panel (Under the protective film). If it is blurry after installation, please remove the polarizer film. * We apply comprehensive quality check and testing before dispatching * This item could be used to replace touch panel which is broken, damaged, cracked or unusable. FEATURES * Waterproof, dustproof, smooth surface; * High accuracy, no offset phenomenon, contacts exactly; * Sensitivity point into the system; * Long life, to meet the harsh operating environment, it could tolerate tens of thousands of hits on the panel; ESTIMATED DELIVERY TIME- Economy: 15-50 days- Standard: 10-35 days- Expedited: 4-7 days WARRANTYReplacement/Exchange- Exchange/replace item within 30 days from the day you receive the item.- Buyer will pay for the shipping cost if there is a return or exchange .- The item that the buyer requires exchange/replacement should be in the same condiction that we dispatched. CONTACT USPlease contact us for any question or problem that you may have(Mon-Sat):Berlin: 02:00-12:00 | Moscow: 04:00-14:00 Sydney: 11:00-21:00 | New York: 20:00-08:00
Quantity: 1pcs. Sensitivity point into the system;. Sydney: 11:00-21:00 | New York: 20:00-08:00. Waterproof, dustproof, smooth surface;.
Quantity: 1pcs. Installation instructions not included.There is a layer of polarizer film on the front of the panel (Under the protective film). Sensitivity point into the system;.
Quantity: 1pcs. Sensitivity point into the system;. Waterproof, dustproof, smooth surface;.
See a full catalog of more than 200 Hydraulic Cylinders"Magister Hydraulics" Pivot Pin Zinc plated Pivot Pin for Hydraulic Cylinders. Magister Hydraulics produces standard pivot pins. This is an accessory that connects hydraulic cylinder with a power equipment. These pins come with six pin holes in a line for extra flexibility and customization.Pivot Pin diameter: 3/4"Length: 6"Head diameter: 1"Package includes 2 pins of the same size. It is customers responsibility to ensure that this replacement part is correct for their equipment. We have in stock a variety of standard Hydraulic Cylinders, check out our other items! To ensure customer satisfaction with Magister Hydraulics cylinders, please watch this YouTube video below describing how to measure for proper cylinder replacement:If you have any questions, please do not hesitate to contact us 1(844) 624-4783
If you need any technical assistance, do not hesitate to contact us (844) MAGISTE Free Shipping2-year Warranty Made in EuropeHydraulic Cylinder Welded Double Acting 3" Bore 36" Stroke Clevis End 3x36 NEW Welded Double Acting Hydraulic Cylinder Bore: 3" Stroke: 36" Rod:1.5" Retracted: 46.25" Extended:82.25" Pin Size: 1" Port Size: SAE 8 Column Load: 8,200 lbs Work Pressure: 3500 PSI Color: Black DescriptionPaymentShippingReturnsDescriptionPaymentShippingReturns Magister cylinders are manufactured using steel pistons and steel threaded glands with wear rings for long life. Welded steel clevis ends with a screw-on clevis on the rod end, honed cold-drawn tubing, hard chrome plated rod and top-quality five-component piston seals allow Magister Hydraulics cylinders to work in extreme conditions. Excellent replacement for farming equipment and others. Made in Europe We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping on all our cylinders! Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one. We will refund the amount within 2 business days from receiving the returned item. Restocking fee is 15%. - The customer will be responsible for both outbound shipping and return shipping charges. - The customer may return any unopened (New in Box) merchandise within the specified time for a full refund except a restocking fee of 15%. - Merchandise that has been “Opened” may be returned within the specified time, however the returned items must be in a condition worthy of selling “new” with all original materials and packaging present. Power Equipment Returns are not eligible for returns once it has been in contact with gas or oil. Once gassed or oiled it will not be accepted for return even if sent back. If you have gassed or oiled the machine and are having problems, you will need to take it to an authorized service center. If it is a manufacturer defect it may be covered under warranty through that service dealer. BENT RODS IS NOT A WARRANTY CASE!!!High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer - Magister Hydraulics. How it's done. Moving Industry Seamlessly. Welded Double Acting Hydraulic Cylinder Bore: 3" Stroke: 36" Rod:1.5" Retracted: 46.25" Extended:82.25" Pin Size: 1" Port Size: SAE 8 Column Load: 8,200 lbs Work Pressure: 3500 PSI Color: Black If you need any technical assistance, do not hesitate to contact us (844) MAGISTE Free Shipping2-year Warranty Made in EuropeHydraulic Cylinder Welded Double Acting 3" Bore 36" Stroke Clevis End 3x36 NEW Welded Double Acting Hydraulic Cylinder Bore: 3" Stroke: 36" Rod:1.5" Retracted: 46.25" Extended:82.25" Pin Size: 1" Port Size: SAE 8 Column Load: 8,200 lbs Work Pressure: 3500 PSI Color: Black Description Magister cylinders are manufactured using steel pistons and steel threaded glands with wear rings for long life. Welded steel clevis ends with a screw-on clevis on the rod end, honed cold-drawn tubing, hard chrome plated rod and top-quality five-component piston seals allow Magister Hydraulics cylinders to work in extreme conditions. Excellent replacement for farming equipment and others. Made in EuropePayment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping on all our cylinders! Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one. We will refund the amount within 2 business days from receiving the returned item. Restocking fee is 15%. - The customer will be responsible for both outbound shipping and return shipping charges. - The customer may return any unopened (New in Box) merchandise within the specified time for a full refund except a restocking fee of 15%. - Merchandise that has been “Opened” may be returned within the specified time, however the returned items must be in a condition worthy of selling “new” with all original materials and packaging present. Power Equipment Returns are not eligible for returns once it has been in contact with gas or oil. Once gassed or oiled it will not be accepted for return even if sent back. If you have gassed or oiled the machine and are having problems, you will need to take it to an authorized service center. If it is a manufacturer defect it may be covered under warranty through that service dealer. BENT RODS IS NOT A WARRANTY CASE!!!Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer - Magister Hydraulics. How it's done. Moving Industry Seamlessly. Welded Double Acting Hydraulic Cylinder Bore: 3" Stroke: 36" Rod:1.5" Retracted: 46.25" Extended:82.25" Pin Size: 1" Port Size: SAE 8 Column Load: 8,200 lbs Work Pressure: 3500 PSI Color: Black
Hydraulic Cylinders Manufacturer - Magister Hydraulics. How it's done. Moving Industry Seamlessly. Welded Double Acting Hydraulic Cylinder Bore: 3" Stroke: 32" Rod: 1.5" Retracted: 40" Extended: 72" Pin Size: 1" Port Size: SAE 8 Column Load: 12,200 lbs Work Pressure: 3500 PSI Color: Black
If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping2-year Warranty Made in EuropeHydraulic Cylinder Welded Double Acting 3" Bore 10" Stroke Clevis End 3x10 NEW Welded Double Acting Hydraulic Cylinder Bore: 3" Stroke: 10" Rod:1.5" Retracted: 20.25" Extended:30.25" Pin Size: 1" Port Size: SAE 8 Column Load: 21,200 lbs Work Pressure: 3500 PSI Color: Black PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund. BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). Customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer - Magister Hydraulics. How it's done. Moving Industry Seamlessly. Welded Double Acting Hydraulic Cylinder Bore: 3" Stroke: 10" Rod:1.5" Retracted: 20.25" Extended:30.25" Pin Size: 1" Port Size: SAE 8 Column Load: 21,200 lbs Work Pressure: 3500 PSI Color: Black If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping2-year Warranty Made in EuropeHydraulic Cylinder Welded Double Acting 3" Bore 10" Stroke Clevis End 3x10 NEW Welded Double Acting Hydraulic Cylinder Bore: 3" Stroke: 10" Rod:1.5" Retracted: 20.25" Extended:30.25" Pin Size: 1" Port Size: SAE 8 Column Load: 21,200 lbs Work Pressure: 3500 PSI Color: Black Payment We accept payment by any of the following methods: PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away! Payments received before 2:30 EST will ship same day. Shipping We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 business days after dispatch. Standard shipping via FedEx Ground. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either replacement or a full refund.Returns BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). Customer is responsible for return without loss or damage. In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder Hydraulic Cylinders Manufacturer - Magister Hydraulics. How it's done. Moving Industry Seamlessly. Welded Double Acting Hydraulic Cylinder Bore: 3" Stroke: 10" Rod:1.5" Retracted: 20.25" Extended:30.25" Pin Size: 1" Port Size: SAE 8 Column Load: 21,200 lbs Work Pressure: 3500 PSI Color: Black
Hydraulic Cylinders Manufacturer - Magister Hydraulics. How it's done. Moving Industry Seamlessly. Welded Double Acting Hydraulic Cylinder Bore: 3" Stroke: 28" Rod: 1.5" Retracted: 36" Extended:64" Pin Size: 1" Port Size: SAE 8 Column Load: 14,400 lbs Work Pressure: 3500 PSI Color: Black
Quantity: 1pcsWe are professional Tablet, Mobile phone, Computer, Industrial parts supplier, welcome contact us for favorable wholesale price! SPECIFICATION* Installation instructions not included.There is a layer of polarizer film on the front of the panel (Under the protective film). If it is blurry after installation, please remove the polarizer film. * We apply comprehensive quality check and testing before dispatching * This item could be used to replace touch panel which is broken, damaged, cracked or unusable. FEATURES * Waterproof, dustproof, smooth surface; * High accuracy, no offset phenomenon, contacts exactly; * Sensitivity point into the system; * Long life, to meet the harsh operating environment, it could tolerate tens of thousands of hits on the panel; ESTIMATED DELIVERY TIME- Economy: 15-50 days- Standard: 10-35 days- Expedited: 4-7 days WARRANTYReplacement/Exchange- Exchange/replace item within 30 days from the day you receive the item.- Buyer will pay for the shipping cost if there is a return or exchange .- The item that the buyer requires exchange/replacement should be in the same condiction that we dispatched. CONTACT USPlease contact us for any question or problem that you may have(Mon-Sat):Berlin: 02:00-12:00 | Moscow: 04:00-14:00 Sydney: 11:00-21:00 | New York: 20:00-08:00