Hydraulic Log Splitter Cylinder Rebuild Seal Kit 4.0" Bore x 1.75" Rod Cylinder. Hydraulic Log Splitter Cylinder Rebuild Seal Kit for 4.0"Bore x 1.75" Rod Cylinde, Precision Made. Widely fit for Hydraulic Log splitter cylinder tube Bore (ID) 4.0" x Rod (OD) 1.75".
Hydraulic Log splitter cylinder rebuild seal kit for 4.5"Bore x 1.75" rod cylinderTo know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.1. Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75". Please note: 4.5" bore size is not Cylinder tube O.D. Cylinder rod size is inside tube part size.2. Wear rings.Piston wear ring : 114.3 mm (OD 4.5") x 107.95mm (ID 4.25”) x 9.53mm (0.375" wide), NylonRod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon3. Piston seals1 square ring and 1 O-ring. Piston Square ring: 114.3 mm x104.3mm x 3.28mm; O-ring (installed under the square ring): 103mm x 2.65mm. CPU + NBR4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. 5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPUBelow is 4.5"Bore x 1.75" rod cylinder Specification that OEM made by this seal kit:Retracted (center to center between rod mountain hole and clevis hole: 32.4"Extended (center to center same as above): 56.4"Stroke: 24±0.05"Dimension from center of clevis hole to back face of cylinder: 2.95"Dimension from center of rod end hole to front face of rod: 1.06"Dimension from center of rod end hole to front face of cylinder: 1.18"Ports: 1/2" NPTDimension from port to port: 25.4"Rod: 1.75" rodRod end mountain hole: 0.55"Clevis Mountain hole: 1.16"Dimension between mountain clevis to clevis: 0.87"Thickness of each mountain clevis: 0.375"Length of each mounting clevis: 4.125"
Cylinder tube Bore (I.D.) 5" x rod (O.D) 2". Below is 5" bore x 2" rod cylinder Specification that OEM made by this seal kit Double check each seal groove is good for our part sitting in. Rod: 2.0" rod.
Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Rod: 1.75" rod. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. Wear rings. Piston wear ring: 101.6 mm ( OD 4") x 95.25mm (ID 3.75") x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2") x 9.53mm (0.375" wide), Nylon.
Store Home|New Arrival|Ending Soon|Add to Favourites|View Feedback|Contact usStore CategoriesClutch KitGaskets, Seals & KitsBelt, Chain & Sprocket PartsRocker Arms & PartsExhaust Gaskets & SealsSnow Plows & PartsCamshaftsCylinder PartsToolsFor HarleyFor PolarisFor HondaFor KawasakiFor SuzukiFor YamahaOthersWhy Buy From UsHydraulic Log Splitter Cylinder Rebuild Seals for 4.0" Bore x 1.75" Rod CylindeITEMS DESCRIPTION Please make sure your model matches the description, remove and measure your cylinder to compare with each item specification. 1. Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Please note some cylinder rod head OD size is not rod size. 2. Wear rings. Piston wear ring: 101.6 mm ( OD 4") x 95.25mm (ID 3.75") x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2") x 9.53mm (0.375" wide), Nylon 3. Piston seals 1 square ring and 1 O-ring. Piston Square ring: D101.6 mm x 91.6mm x 3.28mm; O-ring (installed under the square ring): 91.0 mm x 2.65 mm . CPU + NBR 4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. 5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU Below is 4.0" Bore x 1.75" rod cylinder Specification that OEM made by this seal kit: Retracted (center to center between rod mountain hole and clevis hole: 32.4" Extended (center to center same as above): 56.4" Stroke: 24±0.05" Dimension from center of clevis hole to back face of cylinder: 2.95" Dimension from center of rod end hole to front face of rod: 1.06" Dimension from center of rod end hole to front face of cylinder: 1.18" Ports: 1/2" NPT Dimension from port to port: 25.4" Rod: 1.75" rod Rod end mountain hole: 0.55" Clevis Mountain hole: 1.16" Dimension between mountain clevis to clevis: 0.87" Thickness of each mountain clevis: 0.375" Length of each mounting clevis: 4.125"ShippingPaymentReturnsAbout usContact usWe will ship from KY, TX, and WC warehouses in the United States (depending on the inventory quantity and your location). We cooperate with USPS and UPS transportation service providers to provide you with free delivery services. If you need the other transportation service provider, such as DHL or FedEX, please leave a message and let us know when placing an order. Please note that overseas territories of the United States will not be available for purchase or will require additional freight.Usually, we will ship the item out and upload tracking number within 1-2 business days after payment received.We will only accept PayPal payment.Please pay using PayPal ONLY within 7 days from the date of transaction be made.Secured credit card payment through PayPal accepted.We offer 1 Year Warranty Against Manufacturing Defects on our products.After communications, if you are not satisfied with this transaction unfortunately, you might need refund/returning and replacementWe offer not less than 30 days for return and refund policies. If the items that you received got any quality problems or damaged, please CONTACT US FIRST, and provide the photos or video, we will arrange the replacement or refund. But we do not accept the return if the item damaged by the buyers operational errors. Return shipping cost is paid by Buyer.Welcome to JINFANNIBI, we commit to provide you the best innovative, quality products & professional services with competitive prices. Our mission is to provide each customer the best possible shopping experience for automotive parts & accessories.For any reasons you want to contact us, We promise you that you will get response within 24 hours during working days.We aim at satisfying every visitor, no matter what kind of situation you meet with, we will be right here to serve you. Contact our team before claiming or opening a case or leave us negative feedbacks,we will do our best to resolve it.We aim to satisfy every buyer, be sure of that you would be 100% satisfied after contact us.If you are happy with the transaction with us, leaving us an ALL-5-STAR positive feedback would be greatly appreciated. Tell your friends when you are satisfied and DO tell us when you are not! Your encouragement will keep us moving forward.Copyright All Rights Reserved.
You will find that the unbranded finish does not clash with other components.
Its high-quality rubber, plastic, and steel components make it resistant to cracking and wear, extending the lifespan of yourlog splitter cylinder. For Cylinder tube Bore (I.D.) 5.0" x rod (O.D) 2.0".
1. Payment methods accepted: Payoneer. Our Payoneer account allows you to pay by credit card, debit card and your paypal balance. 2. All major credit cards are accepted through our secure payment processor Payoneer. 3. We ship items to Your Ebay address.Please make sure your Ebay address is correct before you pay, cause it cannot be changed once the order shipped out. 1. Item will be shipped out within 1-2 business days after clear payment received. 2. Please make sure shipping address on your Ebay account is correct & up-to-date. 3. All of our items are shipped from our US warehouse. 4. Please feel free to contact us via ebay using "Contact member" if you cannot get your order in time. 1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyers choice). 2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to 20% re-stocking fee. 3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please contact us via ebay using"Contact member". We will respond within 1 business day or less.Thank you for your understanding. Our office hours is as below: - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday And our office is closed on Sunday and public holidays (Hong Kong) We apologize for the late reply during the holidays. Please include your ebay item number or order number in all communications. All rights reserved.
Store Home|New Arrival|Ending Soon|Add to Favourites|View Feedback|Contact usStore CategoriesClutch KitGaskets, Seals & KitsBelt, Chain & Sprocket PartsWheel & Tire PartsEngine PartsRocker Arms & PartsExhaust Gaskets & SealsSnow Plows & PartsBody PartsCamshaftsCylinder PartsToolsFor HarleyFor PolarisFor HondaFor KawasakiFor SuzukiFor YamahaOthersWhy Buy From UsHydraulic Log Splitter Cylinder Rebuild Seals for 4.5" Bore x 1.75" Rod CylindeITEMS DESCRIPTION Hydraulic Log splitter cylinder rebuild seal kit for 4.5"Bore x 1.75" rod cylinderTo know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.1. Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75". Please note: 4.5" bore size is not Cylinder tube O.D. Cylinder rod size is inside tube part size.2. Wear rings.Piston wear ring : 114.3 mm (OD 4.5") x 107.95mm (ID 4.25”) x 9.53mm (0.375" wide), NylonRod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon3. Piston seals1 square ring and 1 O-ring. Piston Square ring: 114.3 mm x104.3mm x 3.28mm; O-ring (installed under the square ring): 103mm x 2.65mm. CPU + NBR4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. 5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPUBelow is 4.5"Bore x 1.75" rod cylinder Specification that OEM made by this seal kit:Retracted (center to center between rod mountain hole and clevis hole: 32.4"Extended (center to center same as above): 56.4"Stroke: 24±0.05"Dimension from center of clevis hole to back face of cylinder: 2.95"Dimension from center of rod end hole to front face of rod: 1.06"Dimension from center of rod end hole to front face of cylinder: 1.18"Ports: 1/2" NPTDimension from port to port: 25.4"Rod: 1.75" rodRod end mountain hole: 0.55"Clevis Mountain hole: 1.16"Dimension between mountain clevis to clevis: 0.87"Thickness of each mountain clevis: 0.375"Length of each mounting clevis: 4.125"ShippingPaymentReturnsAbout usContact usWe will ship from KY, TX, and WC warehouses in the United States (depending on the inventory quantity and your location). We cooperate with USPS and UPS transportation service providers to provide you with free delivery services. If you need the other transportation service provider, such as DHL or FedEX, please leave a message and let us know when placing an order. Please note that overseas territories of the United States will not be available for purchase or will require additional freight.Usually, we will ship the item out and upload tracking number within 1-2 business days after payment received.We will only accept PayPal payment.Please pay using PayPal ONLY within 7 days from the date of transaction be made.Secured credit card payment through PayPal accepted.We offer 1 Year Warranty Against Manufacturing Defects on our products.After communications, if you are not satisfied with this transaction unfortunately, you might need refund/returning and replacementWe offer not less than 30 days for return and refund policies. If the items that you received got any quality problems or damaged, please CONTACT US FIRST, and provide the photos or video, we will arrange the replacement or refund. But we do not accept the return if the item damaged by the buyers operational errors. Return shipping cost is paid by Buyer.Welcome to , we commit to provide you the best innovative, quality products & professional services with competitive prices. Our mission is to provide each customer the best possible shopping experience for automotive parts & accessories.For any reasons you want to contact us, We promise you that you will get response within 24 hours during working days.We aim at satisfying every visitor, no matter what kind of situation you meet with, we will be right here to serve you. Contact our team before claiming or opening a case or leave us negative feedbacks,we will do our best to resolve it.We aim to satisfy every buyer, be sure of that you would be 100% satisfied after contact us.If you are happy with the transaction with us, leaving us an ALL-5-STAR positive feedback would be greatly appreciated. Tell your friends when you are satisfied and DO tell us when you are not! Your encouragement will keep us moving forward.Copyright All Rights Reserved.
If you want no logos, you will find that this un fits the bill.