Widely fit for Hydraulic Log splitter cylinder tube Bore (ID) 4.0" x Rod (OD) 1.75". Nylon Rod wear ring: 44.5mm (ID 1.752”) x 50.8mm (OD 2”) x 9.53mm (0.375” wide). Rod O-ring: 44.5mm x 54mm x 5mm(CPU).
What stands out about this cylinder is its unbranded body, which can look quite sleek.
Please make sure your model matches the description, remove and measure your cylinder to compare with each item specification. 1. Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Please note some cylinder rod head OD size is not rod size. 2. Wear rings. Piston wear ring: 101.6 mm ( OD 4") x 95.25mm (ID 3.75") x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2") x 9.53mm (0.375" wide), Nylon 3. Piston seals 1 square ring and 1 O-ring. Piston Square ring: D101.6 mm x 91.6mm x 3.28mm; O-ring (installed under the square ring): 91.0 mm x 2.65 mm . CPU + NBR 4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. 5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU Below is 4.0" Bore x 1.75" rod cylinder Specification that OEM made by this seal kit: Retracted (center to center between rod mountain hole and clevis hole: 32.4" Extended (center to center same as above): 56.4" Stroke: 24±0.05" Dimension from center of clevis hole to back face of cylinder: 2.95" Dimension from center of rod end hole to front face of rod: 1.06" Dimension from center of rod end hole to front face of cylinder: 1.18" Ports: 1/2" NPT Dimension from port to port: 25.4" Rod: 1.75" rod Rod end mountain hole: 0.55" Clevis Mountain hole: 1.16" Dimension between mountain clevis to clevis: 0.87" Thickness of each mountain clevis: 0.375" Length of each mounting clevis: 4.125"
Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Rod: 1.75" rod. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. Wear rings. Piston wear ring: 101.6 mm ( OD 4") x 95.25mm (ID 3.75") x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2") x 9.53mm (0.375" wide), Nylon.
COST-EFFECTIVE: Boost log splitter performance with Splitter Rebuild Seal Kit. Rod Cylinder Hydraulic Log Splitter Rebuild Seal Kit 4.5" Bore x 1.75". Hydraulic Log splitter cylinder rebuild seal kit for 4.0"Bore x 1.75" rod cylinder.
Wide Application The seal kit is compatible with 4.0"bore x 1.75" rod cylinde, is used to rebuilt most of cylinders. If you don’t confirm whether his cylinder seal kit fits for your cylinder, please measure the cylinder specification before purchasing. High Quality Material This hydraulic log splitter cylinder rebuild seal kit is made of high quality materials with durable and sturdy performance, great fitment, no leakages, reliable to install this seal kit for your log splitter cylinder. .
Specific Application: This Cylinder Rebuild Seal Kit is compatible with Bore 5.0” (Inner Diameter) x Rod 2.0” (Outer Diameter) Cylinder. Please note some cylinder rod head OD size is not the rod size. Features: (1) This kit includes all the seals and o-rings needed for a complete cylinder rebuild, ensuring long-lasting durability and reliability. Made with high-quality materials, this kit is designed to meet or exceed OEM fit and performance specifications. .
Please make sure your model matches the description, remove and measure your cylinder to compare with each item specification. 1. Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Please note some cylinder rod head OD size is not rod size. 2. Wear rings. Piston wear ring: 101.6 mm ( OD 4") x 95.25mm (ID 3.75") x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2") x 9.53mm (0.375" wide), Nylon 3. Piston seals 1 square ring and 1 O-ring. Piston Square ring: D101.6 mm x 91.6mm x 3.28mm; O-ring (installed under the square ring): 91.0 mm x 2.65 mm . CPU + NBR 4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. 5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU Below is 4.0" Bore x 1.75" rod cylinder Specification that OEM made by this seal kit: Retracted (center to center between rod mountain hole and clevis hole: 32.4" Extended (center to center same as above): 56.4" Stroke: 24±0.05" Dimension from center of clevis hole to back face of cylinder: 2.95" Dimension from center of rod end hole to front face of rod: 1.06" Dimension from center of rod end hole to front face of cylinder: 1.18" Ports: 1/2" NPT Dimension from port to port: 25.4" Rod: 1.75" rod Rod end mountain hole: 0.55" Clevis Mountain hole: 1.16" Dimension between mountain clevis to clevis: 0.87" Thickness of each mountain clevis: 0.375" Length of each mounting clevis: 4.125"
Item specifics:Part Type: cylinder rebuild seal kitSeal Size: 5.0"Bore x 2.0" Material: Rubber Plastic Please read below carefully: This kit might not fit your cylinder. The seal kit is used to rebuilt Speeco design or compatible other brand cylinders such as Husky, Split Master, Oregon, Dirty Hands tool and after marker cylinders oversea made with same Speeco design (but might be not good for your 20 years or older design)To know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.1. Cylinder tube Bore (I.D.) 5" x rod (O.D) 2". Please note some cylinder rod head OD size is not rod size.2. Wear rings.Piston wear ring : 127 mm (OD 5") x 120.65mm (ID 4.75”) x 9.5mm (0.375" wide), NylonRod wear ring : 50.8mm (ID 2") x 57.15mm (OD 2.25”) x 9.5mm (0.375" wide) Nylon3. Piston seals1 square ring and 1 O-ring. Piston Square ring: D127 mm x117mm x 3.28mm; O-ring (installed under the square ring): 115 mm x 2.65 mm . CPU + NBR4. Rod O-ring : 50.8mm x 63.5mm x 5mm, CPU. There is O-ring inside.5. Rod dust ring : 50.8mm x 60.3mm 5.5mm /7.3mm, TPUBelow is 5" bore x 2" rod cylinder Specification that OEM made by this seal kit:Retracted (center to center between rod mountain hole and clevis hole: 32.4”Extended (center to center same as above): 56.4”Stroke: 24±0.05”Dimension from center of clevis hole to back face of cylinder: 2.95”Dimension from center of rod end hole to front face of rod: 1.06”Dimension from center of rod end hole to front face of cylinder: 1.18”Ports: 1/2” NPTDimension from port to port: 25.4”Rod: 2.0" rodRod end mountain hole: 0.55”Clevis Mountain hole: 1.16”Dimension between mountain clevis to clevis: 0.87”
Feature: Hydraulic Log splitter cylinder rebuild seal kit for 4.0"Bore x 1.75" rod cylinder To know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in. .